Intelix FLX-44 Manual do Utilizador descarregar pdf (Página 16)

FLX-44 Installaon Guide

Connect TCP/IP (Ethernet) Control

The FLX-44 may be controlled via Ethernet with a third party control system or through a web browser interface.

Addionally, the FLX-44 has an advanced RS232 control mechanism which will transmit RS232 commands through

the HDBaseT output port to control remote devices with a simple command string. Intelix recommends using the

DIGI-HD60C-R for installaons which require RS232 extension.

See page 27 for all available control commands for the FLX-44.

The TCP/IP port requires a standard straight-through Category 5 or

greater cable with the TIA/EIA-568B crimp paern for operaon.

The default sengs for the TCP/IP port are:

IP address: 192.168.0.178

Port: 8080

TIA/EIA-568B

Orange/White

Orange

Green/White

Blue

Blue/White

Green

Brown/White

Brown

Pin 1

Pin 2

Pin 3

Pin 4

Pin 5

Pin 6

Pin 7

Pin 8

1 8

Matrix Control via TCP/IP (Ethernet)

Connect the Ethernet cable between to the matrix and a router with

a straight-through cable or between the matrix and a computer

with a crossover cable.

Router Connecon

1. Congure the router to use the same IP range as the matrix, such as 192.168.0.1.

2. Connect the computer to the router.

3. Connect the FLX-44 to the router

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

Sem comentários

Intelix FLX-44 Manual do Utilizador Página 16